双激光脉冲打靶形成Gd等离子体的极紫外光谱辐射

高端芯片制造所需要的极紫外光刻技术位于我国当前面临35项"卡脖子"关键核心技术之首.高转换效率的极紫外光源是极紫外光刻系统的重要组成部分.本文通过采用双激光脉冲打靶技术实现较强的6.7 nm极紫外光输出.首先,理论计算Gd¹⁸⁺—Gd²⁷⁺离子最外层4d壳层的4p-4d和4d-4f能级之间跃迁、以及Gd¹⁴⁺—Gd¹⁷⁺离子最外层4f壳层的4d-4f能级之间跃迁对波长为6.7 nm附近极紫外光的贡献.其后开展实验研究,结果表明,随着双脉冲之间延时的逐渐增加,波长为6.7 nm附近的极紫外光辐射强度呈现先减弱、后增加、之后再减弱的变化趋势,在双脉冲延时为100 ns处产生的极紫外光辐射最强.并且,在延时为100 ns处产生的光谱效率最高,相比于单脉冲激光产生的光谱效率提升了33%.此外,发现双激光脉冲打靶技术可以有效地减弱等离子体的自吸收效应,获得的6.7 nm附近极紫外光谱宽度均小于单激光脉冲打靶的情形,且在脉冲延时为30 ns时刻所产生的光谱宽度最窄,约为单独主脉冲产生极紫外光谱宽度的1/3.同时...     

Necessary and Sufficient Conditions for Qualitative Properties of Infinite Dimensional Linear Programming Problems

Necessary and sufficient conditions for qualitative properties of infinite dimensional linear programing problems such as solvability, duality, and complementary slackness conditions are studied in this article. As illustrations for the results, we investigate the parametric version of Gale’s example.     

Development of a syn‐Selective Mannich Reaction of Aldehydes with Propargylic Imines by Dual Catalysis: Asymmetric Synthesis of Functionalized Propargylic Amines

Direct coupling of enolizable aldehydes with C‐alkynyl imines is realized affording the corresponding propargylic Mannich adducts of syn configuration, thus complementing previous methods that gave access to the anti‐isomers. The combination of proline and a urea Brønsted base cocatalyst is key for the reactions to proceed under very mild conditions (3–10 mol % catalyst loading, dichloromethane as solvent, ?20 °C, 1.2 molar equivalents of aldehyde) and with virtually total stereocontrol (syn/anti ratio up to 99:1; ee up to 99 %). Some possibilities of further chemical elaboration of adducts are also briefly illustrated.     

Dual‐signal amplification strategy for ultrasensitive chemiluminescence detection of PDGF–BB in capillary electrophoresis

Many efforts have been made toward the achievement of high sensitivity in capillary electrophoresis coupled with chemiluminescence detection (CE‐CL). This work describes a novel dual‐signal amplification strategy for highly specific and ultrasensitive CL detection of human platelet‐derived growth factor–BB (PDGF–BB) using both aptamer and horseradish peroxidase (HRP) modified gold nanoparticles (HRP–AuNPs–aptamer) as nanoprobes in CE. Both AuNPs and HRP in the nanoprobes could amplify the CL signals in the luminol–H₂O₂ CL system, owing to the excellent catalytic behavior of AuNPs and HRP in the CL system. Meanwhile, the high affinity of aptamer modified on the AuNPs allows detection with high specificity. As proof‐of‐concept, the proposed method was employed to quantify the concentration of PDGF–BB from 0.50 to 250 fm with a detection limit of 0.21 fm. The applicability of the assay was further demonstrated in the analysis of PDGF–BB in human serum samples with acceptable accuracy and reliability. The result of this study exhibits distinct advantages, such as high sensitivity, good specificity, simplicity, and very small sample consumption. The good performances of the proposed strategy provide a powerful avenue for ultrasensitive detection of rare proteins in biological sample, showing great promise in biochemical analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

MHD flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge

The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted to the similarity equations by techniques of the similarity transformation. The bvp4c function that is available in MATLAB software is utilized for solving the similarity equations numerically. The numerical results are obtained for selected different values of parameters. The results discover that two solutions exist, up to a certain value of the stretching/shrinking and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions for copper and wedge angle parameter increase. It is also found that the hybrid nanofluid enhances the heat transfer rate compared with the regular nanofluid. The reduction of the heat transfer rate is observed with the increase in radiation parameter. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.     

Effect of polyethylene glycol on corrosion of fresh macroporous silicon in 1.0 M NaOH and application in determination of porosity and thickness by gravimetric measurement

Abstract

This work presents on improvement in gravimetric measurement for determining the porosity and thickness of microporous silicon. Herein, the corrosion of fresh macroporous silicon (f-MPSi) in 1.0?M NaOH with different concentrations of polyethylene glycol (PEG 200/400/600) was studied by weight loss measurement and scanning electron microscopy (SEM). The results showed that the corrosion rate decreased with increasing polyethylene glycol concentration, and increased with an increase in temperature. Polyethylene glycol can inhibit the corrosion of f-MPSi in NaOH solution. Moreover, 1.0?M NaOH/PEG 600 (10%) can be used as the optimized solution to remove f-MPSi for measuring its porosity and thickness by gravimetric measurement.     

Combined Spectroscopic and TD-DFT Analysis to Elucidate Substituent and Acidochromic Effects in Organic Dyes: A Case Study on Amino- versus Nitro-Substituted 2,4-Diphenylquinolines

A combined spectroscopic and TD-DFT case study was performed, to identify a robust method to calculate the complex near UV/Vis absorption spectra of various amino- vs. nitro-substituted 2,4-diphenylquinolines, which vary strongly under neutral and successively acidic conditions. For this, different DFT functionals were tested for geometry optimization and the TD part to calculate the neutral and different protonated species in a fast screening approach, i. e. using single point calculations in an implicit solvent. Offset-corrected M06HF, hitherto only applied to polymers, was identified as a suitable method to reproduce the absorption spectra in a reasonable fashion for all different substitution pattern and all different protonated species at different pH values; moreover, the method properly predicts the energetic ordering of low-lying n-π* and ππ* transitions, which is decisive for the non-/emissive nature of the different compounds. In all, this might provide a valuable tool for computer-aided design of related classes of compounds.     

具有高隔离度的双陷波超宽带多入多出天线

提出了一款具有高隔离度的双陷波超宽带多入多出(UWB MIMO)天线。该天线由两个相同的半切超宽带天线单元倒置构成。通过在天线底板刻蚀栅栏型缺陷地解耦结构,使该MIMO天线的隔离度提高至25 dB。此外,在天线半圆形辐射贴片上刻蚀两个方向相反的"L"型缝隙,实现了双陷波的功能,分别抑制了802.16无线城域网WiMAX(3.2~3.7 GHz)和WLAN(5.15~5.85 GHz)信号对天线系统的干扰。实验结果表明,该天线在3~11 GHz工作带宽内的隔离度大于25 dB,包络相关系数(ECC)小于0.004;第一个陷波频段为3.0~3.7 GHz,第二个陷波频段为5.1~5.85 GHz,有效抑制了WiMAX和WLAN的信号干扰。